22T 2.0 Race Kit: 1/10 2WD Stadium Truck (TLR03004): Spektrum - The Leader in Spread Spectrum Technology

Features

Key Features

22 2.0 caster blocks with 22T 2.0-specific spindles
Wider rear arms for easier direction changes
Gen II shocks with machined piston and x-ring seals
Bell crank steering system for smoother response at every speed
Hard-anodized 7075-T6 aluminum chassis
Updated ball differential with tungsten carbide balls and larger diff rings
TiCN shock shaft, inner hinge pins, and outer threaded hinge pins
Hard-mount battery holder
New, narrower rear hex with less wheel off-set
Heavy Duty Turnbuckles throughout
Mid- and rear-motor configuration parts included
Metric hardware

Product Specifications

Type:: Stadium Truck
Scale:: 1/10
Length:: 15.75 in (400mm)
Width:: 12.72 in (323.2mm)
Height:: 5.63 in (143mm)
Wheelbase:: 11.3–11.41 in (286–290mm)
Chassis:: 2.5mm 7075-T6 Aluminum
Suspension:: Lower A-Arm, Upper Adjustable Link
Drivetrain:: 2WD
Motor or Engine:: 540 size
Speed Control:: Not included
Servos:: Not included
Gear Pitch:: 48-pitch
Wheel Size:: 2.2×1.89 in (56×48mm)
Kit/RTR:: Kit
Shock Type:: 12mm Big Bore, Oil Filled
Body:: 22T Body, unpainted poly carbonate
Ball Bearings:: Full Rubber Sealed Ball Bearings
Experience Level:: Advanced
Recommended Environment:: Outdoor
Assembly Time:: 3-5 Hours
Is Assembly Required:: Yes

Overview

The 22T™ 2.0 kit continues to build on the championship-winning 22™ platform with a host of new features that make it easy for competitors of all experience levels to drive fast. Updates include advanced suspension geometry adapted from the 22 2.0 buggy, a new bell-crank steering system, Gen II shocks with X-ring seals and a thoroughly refined ball differential with tungsten carbide diff balls. You also get popular option parts as well as hardware for both mid- and rear-motor configurations.

Updated Suspension Geometry
New suspension geometry makes the 22T™ 2.0 truck easy to drive, and drive fast. It combines castor blocks from the 22™ 2.0 buggy with 22T 2.0-specific spindles so it’s easier to drive around center. This combination also lets the rear end squat under throttle for better acceleration. Wider rear arms and a narrower hex with less off-set make for easier direction changes and quicker releases from the turns.

Gen II 12mm Big Bore Shocks
The Gen II shocks keep operating friction to a minimum without leaking or weeping oil. This keeps suspension response consistent and significantly reduces maintenance. They deliver a plush ride near the top of their travel but still provide plenty of bottoming resistance when landing big jumps. Updated parts include:
- Longer shock bodies and shafts for increased suspension travel
- CNC machined 2-hole 1.5mm and 1.6mm pistons
- CNC machined O-ring and guide bushings
- New silicone X-ring seals
- Ti-Carbo-nitride coated shock shafts
- Aluminum bleeder screw shock caps

Designed for Durability
A main focus of the 22 2.0 platform design is durability. Composite components are 15% beefier than most off-road race kits and aluminum parts are used in all the critical areas to reduce wear and the likelihood of costly repairs.

Optimized 22 Differential
The ball differential now features all new components that improve performance and durability.
- Tungsten carbide diff and thrust balls
- Larger OD diff rings with surface ground finish
- Heat treated thrust washers
- Gen II, one-piece diff nut
- Outdrive with 2nd operation ring surface machining

Hard Anodized 7075-T6 Aluminum Chassis
The strength and managed flex characteristics of this chassis make it perfect for competition. It has also been milled to keep the center of gravity as low as possible.

Metric Hardware
All screws, nuts and bearings are metric, making the 22T 2.0 kit a truly global racing platform.

Gallery

UPDATED SUSPENSION GEOMETRY

New suspension geometry makes the 22T™ 2.0 truck easy to drive, and drive fast. It combines caster blocks from the 22™ 2.0 buggy with 22T 2.0-specific spindles so it's easier to drive around center.
UPDATED & OPTION PARTS INCLUDED

Option parts included aluminum bleeder shock caps and grooved slipper plates. You also get Ti-Carbonitride option parts like threaded front kingpins and rear outer hinge pins - basically everything you need to build a team level car.
BELL CRANK STEERING

The new ball bearing, bell crank steering system reduces Ackermann angle for more control on corner entry. This improves low-speed steering while making high-speed steering less sensitive and easier to control.
GEN II 12MM BIG BORE SHOCKS

The Gen II shocks keep operating friction to a minimum without leaking or weeping oil. They deliver a plush ride near the top of their travel but still provide plenty of bottoming resistance when landing big jumps.
DESIGNED FOR DURABILITY

A main focus of the 22 platform design is durability. Composite components are 15% beefier than most off-road race kits and aluminum parts are used in all the critical areas to reduce wear and the likelihood of costly repairs.
REAR- OR MID-MOTOR - YOUR CHOICE

Parts for both mid- and rear-motor configurations are included. In testing, the rear-motor configuration has proven to work well on all surfaces. Going with the mid-motor option gives the truck better balance and makes it even easier to drive on high-grip surfaces.
OPTIMIZED 22 DIFFERENTIAL

The ball differential now features all new components that improve performance and durability.
HARD ANODIZED 7075-T6 ALUMINUM CHASSIS

The strength and managed flex characteristics of this chassis make it perfect for competition. It has also been milled to keep the center of gravity as low as possible.
METRIC HARDWARE

All screws, nuts and bearings are metric, making the 22T 2.0 kit a truly global racing platform