Log in to My Spektrum Get easy, online access to your Spektrum™ software updates, product registration and personalized settings.

DX18QQ

This special edition DX18QQ transmitter builds on the unparalleled capabilities of Spektrum™ technology with refinements shaped by influential RC pilot, Quique Somenzini.

DX18QQ Quique Special Edition w/AR12120,XPLUS8 M2

SPM18800

$1,039.99*

*at participating retailers

DX18QQ Quique Special Edition w/AR12120,XPLUS8 M2

Item #: SPM18800

$1,039.99*

Retail: $1,299.99*

Find a Retailer Buy Now *Avaliable at participating retailers

Features

Exclusive DX18QQ Software Features.

In addition to the unparalleled programming options all DX18 transmitters possess, the DX18QQ comes with these exclusive features:

Direct Access to Monitor Screen

Instead of entering the Function List to view the Monitor screen, you can scroll to it directly from the Main screen using the SimpleScroll™ interface.

Direct Access to System Settings

Switch between Function List and System Settings menus without having to power off the transmitter.

6-Servo Wing Setup

Setting up aileron servos for a Giant-Scale model is even easier with the pre-programmed, 6-servo wing setup that has been added to the airplane wing types.

Expanded Sound Selection Menu

Activate or inhibit specific system sounds without affecting others. L

Pitch Curve for Variable-Pitch Props

A 7-point pitch curve can be activated for airplanes equipped with variable-pitch propellers.

Origin Mixing

Choose to limit the master input of a mix to the stick position of the elevator, aileron or rudder.

0.5% Mixing Increments

Mixing values of less than 10% can be adjusted in 0.5% increments, giving you a greater degree of freedom when fine-tuning control response.

Canard Setup

Canard options (1- and 2-servo) are available under airplane tail types when you select the elevon wing type.

Expanded Avatar Selection

A variety of model avatars are available for all three model types. This lets you choose an avatar that more closely matches the appearance of the model you have saved in memory.

Expanded In-Flight Gain Adjustment Options

You can assign in-flight gain adjustment to either of the levers on the side of the transmitter, the right knob or one of the auxiliary trim switches.

Custom Flight Modes

Assign 5 airplane flight modes to any two switches.

Max Out Your Functions.

The DX18QQ comes with a Spektrum™ AR12120 12-channel receiver and an X-Plus™ 8 channel expansion module. Simply plug the X-Plus 8 module into the AR12120 and bind the combination to the transmitter. This will allow you to take advantage of all 18 fully-proportional channels right out of the box.

About Quique Somenzini.

It began in Argentina with his father, Mario. Throughout the late 1970s, Mario Somenzini was the reigning F3A Champion of Argentina and most of South America. As a boy, Quique would spend hours with his father at the flying field cleaning airplanes, watching and learning. It paid off.

In 1976, Quique made his first RC solo flight at the age of nine. Just three years later, he followed in his fathers footsteps and won his first Argentina F3A National Championship. That same year he had the privilege of representing his country at the F3A World Championships in South Africa. He didnt win, but he did set a record of sorts as the youngest pilot ever to compete for an F3A world title a record that still stands today.

In the years that followed Quique won a host of other titles, including 17 more Argentina F3A national championships, four U.S. F3A national championships, four first-place TOC finishes and one F3A world championship. But if you ask him, there is one RC title Quique cherishes above all others "The Father of 3D". Around the world, RC pilots point to his pioneering efforts in perfecting the art of flying aerobatics beyond the stall as the birth of 3D aerobatics.

Today, Quique Somenzini remains one of the most dynamic figures in RC flight, one who will be shaping the future of the sport for years to come.

Limited Edition Accessories

In addition to exclusive software features and a custom finish, the DX18QQ comes with an impressive array of limited edition accessories.

  • AR12120 12-Channel DSMX® PowerSafe™ Receiver
  • X-Plus™ 8 Channel Expansion Module
  • 2S 2600mAh LiPo Transmitter Battery
  • Certificate of Authenticity personally signed by Quique
  • DX18QQ Sol de Mayo Transmitter Case
  • DX18QQ Microfiber Display Screen Cloth
  • Orange Anodized Spektrum™ Flashlight
  • DX18QQ Special Edition DVD
  • Engraved DX18QQ Dog Tag (when you email spektrum@horizonhobby.com)
  • Optional 34mm Orange Anodized Stick Ends
  • DX18QQ Decal Sheet
  • DX18QQ Neckstrap
  • DX18QQ SD Card
  • DX18QQ Hat

Key Features

  • “Roll” between telemetry, monitor and main screens without entering the Settings menu
  • Switch between Function List and System Settings menus without powering off the transmitter
  • Program mixes of less than 10% can adjust in 0.5% increments
  • 6-servo wing setup
  • Canard options (1- and 2-servo rudder) are available under tail type when the elevon wing type is selected
  • Origin mixing
  • Sound menu that lets you activate or inhibit specific DX18QQ sounds
  • Assign five Airplane flight modes to any two switches
  • Expanded selection of avatar choices for model memory identification
  • Assign in-flight aircraft gain adjustment to one of the side levers, the right knob or one of the auxiliary trim switches
  • Pitch curve for Airplane models with variable pitch props
  • Program the throttle trim to function as a 3-position switch for turbine engine starts

Product Specifications

# of Channels:
18
Modulation:
DSM2®/DSMX®
Band:
2.4GHz
Receiver:
AR12120 12-channel DSMX® PowerSafe™ receiver
Model Memory:
50
Modes:
User-selectable, Mode 1–4
Transmitter (Tx) Battery Type:
2600mAh 2S LiPo
Charger:
Internal 200mA charger—includes global power supply

Overview

From pioneering the sport of 3D aerobatics to shaping the future of RC aircraft design, Quique Somenzini is one of the most influential forces in the world of model aviation. This stunning DX18QQ Limited Edition transmitter, of which only 2,000 have been made, is one more testament to his relentless pursuit of excellence.

In addition to the unparalleled capabilities all DX18 transmitters possess, the DX18QQ comes equipped with exclusive software features and ergonomics shaped by Quique’s decades of RC experience and know-how.

Included DX18QQ Limited Edition accessories:
– AR12120 12-channel DSMX® PowerSafe™ receiver
– XP8000 X-Plus™ 8-channel expansion module
– 2S 2600mAh Li-Po transmitter battery
– Certificate of Authenticity personally signed by Quique
– DX18QQ Sol de Mayo transmitter case
– DX18QQ microfiber display screen cloth
– Orange-anodized Spektrum™ flashlight
– DX18QQ Special Edition DVD
– Engraved DX18QQ dog tag
– Optional 34mm orange-anodized stick ends
– DX18QQ decal sheet
– DX18QQ neckstrap
– DX18QQ SD card
– DX18QQ hat

The DX18 transmitter is not compatible with the Spektrum AR6000/BR6000 receiver.

Always purchase products from a Horizon Hobby, Inc. authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, Inc. disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM or Spektrum.

Attention: Horizon Hobby has confirmed that all Spektrum Products being sold by KoKo Technology are counterfeit. We consider it a danger to use these products, waive all liability and will not support any warranty or service in regards to them.

Manuals and Support

Set-Ups

Get aircraft or vehicle set-ups for your transmitter.

Download DX18 Setups

Software Updates

You must register your product to receive updates.

Check for Updates

Warranty

1 Authorized Warranty Period (One Year)

What this Warranty Covers:
Horizon Hobby, Inc., (Horizon) warrants to the original purchaser that the product purchased (the "Product") will be free from defects in materials and workmanship for a period of 1 years from the date of purchase.

2 Authorized Limited Warranty & Limits of Liability International

What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, or (vi) Product not compliant with applicable technical regulations.

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.

Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.

Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase.

Law
These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice.


WARRANTY SERVICES

Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call 877.504.0233 toll free to speak to a Product Support representative.

Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/content/_service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office.

Warranty Requirements
For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our website http://www.horizonhobby.com/content/_service-center_render-service-center.

ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the sender’s choice and at the sender’s expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded.

United States:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822

All other Products requiring warranty inspection or repair should be shipped to the following address:

Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822


Please call 877-504-0233 or e-mail us at productsupport@horizonhobby.com with any questions or concerns regarding this product or warranty.

United Kingdom:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby Limited 
Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom

Please call +44 (0) 1279 641 097 or e-mail us at sales@horizonhobby.co.uk with any questions or concerns regarding this product or warranty.

Germany:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Technischer Service
Christian-Junge-Strasse 1
25337 Elmshorn
Germany

Please call +(0) 49 4121 2655 100 or e-mail us at
service@horizonhobby.de with any questions or concerns regarding this product or warranty.

France:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby SAS
11 Rue Georges Charpak
77127 LIEUSAINT

Please call +33 (0) 1 60 18 34 90 or e-mail us at
infofrance@horizonhobby.com with any questions or concerns regarding this product or warranty.

China:                                                                                           Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby – China
Room 506, No. 97 Changshou Rd.
Shanghai, China 200060

Please call +86 (021) 5180 9868 or email us at info@horizonhobby.com.cn with any questions or concerns regarding this product or warranty.

 



 

Modified: 11/13/2012

Related Parts

Included  See All

  • Male/Female Universal Bind Plug[SPM6803]

  • Intl and Domestic Air Transmitter AC Charger[SPM9551]

  • AR12120 12-Channel DSMX/XPlus PowerSafe Receiver[SPMAR12120]

  • 2600 mAh LiPo Transmitter Battery: DX18[SPMB2600LPTX]

Parts Listing  See All

  • Battery Door: DX18[SPMA3070]

  • Back Grips (Left/Right): DX18[SPMA3071]

  • Side Grips (Left/Right): DX18[SPMA3072]

  • Rubber Plugs: DX18[SPMA3073]

Optional Accessories  See All

  • Digital Servo and Receiver Current Meter[HAN172]

  • Spektrum Single Stand Up TX Case Foam[SPM6709]

  • Stand Up TX case optional dual TX foam set[SPM6712]

  • Trainer Cord: ALL SPM[SPM6805]